Die Cutting Machine
38 Years+ Manufacturer
Quote Now

swing arm cutting machine perliminary control checks

In order to check on any damage the swing arm cutting machine may have suffered during transport,control the condition of the press commands(at least from the outside) and check for anu oil leakage.

Before connecting the machine to main line,check that the voltage is the same as that of the cutting machine printed on the plate attached to the electrical box.If the voltage or frequency is different from that of the main line,ask advice from the Gerson machinery or the sales agent.

Attention!! According to the agreement made with the customer ,ther clicker press can be delivered with or without the hydraulic oil load.Never start the machine until the oil level has been carefully checked to be sure it is correct for machine function.

The oil tank is filled through the opening on the left hand side of the clicker press after remove of the protection shield .Pour the hydraulic oil to the tank till it reaches a level of about 3 centimetres under lip of the opening.

Do not open the right hand side cap as this will empty the oil in the tank.

Have Question? Ask Now