When using Gerson swing arm clicker press ,Please remember the following using notice :
1.Clicker press must make sure the power voltage is correct.The creepage switch installed .The ground wire is connect.
2.Please select the regular international standard L-HM-46# hydraulic oil.Otherwise,it will affect the life of the machine,even in high or low temperature environment,The swing arm clicker press does not work.
3.Please must make sure add enough oil into the oil tank.if not ,the arm cannot rise up when start to use the clicker press machine.
4.Screws of the top cap can not be loose,damaged,tighten if loose in a timely manner ,if damaged ,cannot disassemble ,repair requested professional mechanic.(because suppressed by the top cap is picked up springs,elastic large,non-professionals can not be dismantled without special tools in order to avoid injury)
5.Inspection,cleaning ,maintenance,repairing machines,you should first stop the cutting machine running,then shut off the main power.
