Step by step roll and sheet auto feeder die cutting machine is special for continuously diecutting the rolled or sheet material such as insole paper board, sockliner, football material, synthetic PU materials, EVA foam,fabric materials and so on, especially for the mass diecutting .
1.The upper cutting head is moved leaft or right via the transmission of ball screw, and the cutting precision can be within 0.1mm.
2.There are three optional cutting methods as manual, semi-automatic and automatic operations for meeting various different material and die operation requirements.if choose the automatic operation ,only need one worker to pick up the cutting-out products.
3.The machine can feed single or muti-layers material.The feeding length and speed can be accurately set by the system .
4.As the machine is controlled by microcomputer with high automation .Production efficiency can be improved for 3-5 times than normal machine ,so that can save labor cost and time .
5.The eye sensor safety system is equipped so that can make sure the safety of operator.
6.Auto feeding system is individually designed and manufactured to meet different material: 1.rolled form material; 2.sheet form material.
7.Gerson accept any custom special specifications ,welcome to contact us for more information.
Model | GRM(A)-25T to 200T |
Max cutting force(T) | From 25 Tons to 200 Tons |
Range between working table | 50-240mm (Upper to Bottom Table) |
Stroke Adjustment | 0-170mm |
Cutting table width(mm) | 1800~2500mm or more |
Based on your material and die | |
Example: 1600X600mm etc., | |
Cutting Head
Movable trolley |
500×500 to 1000x1000mm |
Motor power | 3kw to 22KW |
Electric Power | 220V/380V/415V,50-60hz etc., |
Machine Net weight (KG) | 1600 to 16500 |
1700 to 17500 |
Gerson can make the cutting machine according to your specifical requirement :such as cutting force power,worktable size,motor,etc.,