Precautions Gerson beam press during operation
1.When set the cutting knife, loosen the setting handle first, so that the setting pole can touch the control switch of the cutting point, otherwise, when the setting switch of cutting knife turns to ON, there are no given actions.
2.When work, the cutting knife shall be placed in the central position of the upper pressure plate as far as possible to avoid unilateral attrition of the machine and influence the life.
3.When change new cutting knife and the heights are different, please reset according to the setting methods.
4.During the cutting actions, the hands shall leave the cutting knife or chop plate, and it is forbidden to support the die for cutting with hand to avoid dangers.
5.When the operator needs to leave the position, make sure to press the brake switch or turn off the motor to avoid the improper operation of others causes damages to the machine.
6.Please avoid overload use of the machine which will consequently damage the machine and reduce use life.
