Open Cell Epdm Foam Die Cutting Machine is the special die cutting machine for cutting out Open Cell Epdm Foam.The Open Cell Epdm Foam can make the gasket or other similar products.
1.The machine can die cut out the material such as Open Cell Epdm Foam,Nbr Foam Rubber,Neoprene Closed Cell Foam or other similar products.
These material can be used for seals, gaskets, pads, closure strips, pillar stuffers, cushioning in or around windshields, door panels, instrument panels, headliners, etc.Also the below :
Sealing of air-conditioner ducts.
For objects/areas requiring superior water tightness.
For instrumental panel and windshield mounting.
For mounting of mirrors and center pillars.
Automotive – sealing of HVAC unit, dashboard, air duct, glass run, fire wall.
Building & Construction – sealing of exterior panel joints, solar panels.
Industrial – sealing of air-conditioners, mobile phones, refrigerators.
2.The die cutitng machine can cut out any shapes by the cutting die .Gerson can make the custom die mold for you to work with the die cutting machine.
3.The machine can feed the material by manual or autoamticly .
4.Four post with self-balance connecting rod,and auto-balance structure of double-cylinder, all it make sure equal pressure in any working area when cutting the material.
Welcome to contact Gerson at any time we will reply you immedieately.
Model | GRB(C)-25T to 500T |
Max cutting force(T) | From 25 Tons to 500 Tons |
Range between working table | 50-240mm (Upper to Bottom Table) |
Stroke Adjustment | 0-170mm |
Cutting area(mm) | (500-3000)X(500-3000)mm |
Based on your material and die | |
Example: 1800X1000mm etc., | |
Motor power | 1.5 to 22KW |
Electric Power | 220V/380V/415V,50-60hz etc., |
Machine Net weight (KG) | 1600 to 16500 |
1700 to 17500 |