Clicking Presses with Turning Arm is most for die cutting small pieces:leather goods ,gaskets, abrasives, foam & rubber, plastics, composites, cardboards etc.,
1.Automatic stroke-end setting-up to use cutting knives of different heights without any adjustment.
2.Control push-buttons with built-in device for 5/10 of second maximum delay operation to ensure positive safety.
3.Two push-buttons and one potentiometer to set the cutting power.
4.The main control organs are covered by international patents.
5.The cutting force from 22 tons to 27 tons.
6.Three button handle is available.
Model | Cutting Table | UP Beam Head | Max Pressure | Net Weight |
GRA-270L | 1000×500 | 610mm | 25T–245Kn | 1050 (kg) |
GRA-270M | 1000×500 | 500mm | 25T–245Kn | 1030 (kg) |
GRA-270C | 900×450 | 500mm | 25T–245Kn | 900 (kg) |
GRA-250L | 1000×500 | 370mm | 25T–245Kn | 990 (kg) |
GRA-250M | 900×450 | 370mm | 25T–245Kn | 880 (kg) |
GRA-220L | 1200×500 | 500mm | 22T – 216Kn | 1060 (kg) |
GRA-220M | 900×450 | 370mm | 22T – 216Kn | 880 (kg) |
GRA-220C | 900×430 | 370mm | 22T – 216Kn | 630 (kg) |
GRA-10C | 600×300 | 300mm | 8T – 78 Kn | 430 (kg) |
Electric Supply Voltage: 3 phases×440/415/400/380/220/200V, 50/60 Hz,
Single phase:110V/240V/220V, 50/60 Hz