Gerson travelling head press both have manual feed and automatic feed.The manual traveling head press is able to process material in roll form as well as sheets when using swing arm press is too small or limited.
1.Die cut materials that are soft or rigid
2.Die cut materials in single or multiple layers
3.The cutting setting is simple,easy to operate.
4.All standard die constructions can be used – strip steel, wood forme or forged steel
5.Powered head traverse for effortless operation
6.Simple, accurate die setting and daylight adjustment
7.High reliablility ,low noise,low consuption.
8.Photocell front barrier for complete safety
9.Illuminated work area
10.Complete with high grade polypropylene cutting board, hydraulic oil and operating manual
Gerson can make the cutting machine according to your specifical requirement :such as cutting force power,worktable size,motor,etc.,
Model | GRM(A)-25T to 200T |
Max cutting force(T) | From 25 Tons to 200 Tons |
Range between working table | 50-240mm (Upper to Bottom Table) |
Stroke Adjustment | 0-170mm |
Cutting table width(mm) | 1800~2500mm or more |
Based on your material and die | |
Example: 1600X600mm etc., | |
Cutting Head Movable trolley | 500×500 to 1000x1000mm |
Motor power | 3kw to 22KW |
Electric Power | 220V/380V/415V,50-60hz etc., |
Machine Net weight (KG) | 1600 to 16500 |
1700 to 17500 |
Gerson can make the cutting machine according to your specifical requirement :such as cutting force power,worktable size,motor,etc.,