Important Notice for Operation of swing arm clicker press
Just same as other machines, there’s the danger for the operator to operate this clicker press Machine. If you could strictly abide by the safety instructions, the danger could be avoided as much as possible.
The swing arm clicking press operator should learn the following info in the heart and strictly execute it.
1. The clicker machine head should keep accordance with the central line of the die cutter as much as possible, so as to avoid the single-surface abrasion which could influence its service life.
2. The relief valve fixed on the oil route block has been correctly set by the manufacturer, please do NOT adjust it randomly. Otherwise, it could make the setting pressure too high and damage the oil system.
3. For replacing the new cutters. If the height is not in accordance, please reset it accordingly.
4. Please keep the hand away from the cutter or base plate when cutting or blanking.
It’s strictly forbidden to stretch any part of the body under the pressure plate when cutting.
5. If the operate has to leave the working position temporarily, please confirm to turn off the motor, so as to avoid any damage of the Machine resulted from the improper operation by others.
6.It’s strictly forbidden for the operator to leave the running Machine.
7.It’s strictly forbidden for the operator to operate the Machine after drinking, having medicine or drugs, or being tired.
