Die Cutting Machine
38 Years+ Manufacturer
Quote Now

Hydraulic Sample Press

Hydraulic Sample Press is the good press machine for cutting test samples for textiles,Rubbers and soft plastic,Cork,Soft wood,Paper,Cardboard,EVA,Leather prior to testing.

Hydraulic Sample Press
Hydraulic Sample Press

1.It is hydraulic driven system uses top quality hydraulic parts ensure the qualtity of press machine.
2.It is extremely simple to use with easy adjustment of the cutting stroke.Just put the smaple material on the bed of machine then put the die tool on the material,move the upper plate over the the die tool,push the button and then the upper plate will cut out the machine.
3.The cutting force can adjust and control push buttons with time delay and required double hand operation ensure complete operator safety.
4.Gerson have different model from 5 tons,8 tons, 10 tons,12 tons,15 tons ,18 tons,20 ton ,22 tons,25 tons,27/28 tons for small size machine .also have 30 tons to 500 tons for big size.
5.All Gerson machine can custom built.welcome to contact Gerson.

The below specification is for the above photo.

Model GRA-220 GRA-270 GRA-270M GRA-270L
Maximum cutting force 22T 25T(27T) 25T(28T) 25T(28T)
Table area 900×430mm 1000×500mm 1000×500mm 1000×500mm
Swing arm width 370mm 370mm 500mm 610mm
Cutting stroke 90mm 90mm 90mm 90mm
Motor power 1.1KW 1.5KW 1.5KW 1.5KW
Electric Supply Voltage 3×440/415/400/380/220/200V, 50/60 Hz
Single phase 240V/220V, 50/60 Hz
Packing size 1050×1000×1500mm 1150×1200×1500mm 1150×1200×1500mm 1150×1200×1500mm
N.W(with oil) 650kg 960Kg 1050kg 1200kg
G.W 740kg 1120Kg 1210kg 1360kg

 

Have Question? Ask Now