Hydraulic press machine Care and maintenance:
1. Working oil recommended 32#, 46# anti-wear hydraulic oil, used oil in the range of 15 to 60 degrees Celsius.Gerson hydraulic cutting press recommend use 46# hydraulic oil.
2. Strict filter before allowing the oil to join the tank.
3. Working fluid replaced once each year, of which the first change in time should not exceed three months;
4. Slider should always inject lubricant, column appearance appearance should be kept clean, the work should be preceded each injection oil.
5. 500T under concentrated load at nominal maximum allowable eccentricity 40mm. Too easy to make the column eccentric strain or other undesirable phenomena occur.
6. Pressure gauge calibration check once every six months;
7. The hydraulic machine longer-term unused, the parts of the surface should be cleaned and coated with anti-rust oil.
