Before starting up the machine,or carrying out any maintenance operations,it is essential to know the basic knowlege of general safty regulation for clicker press .
In order to safeguard the operators working on the machine from any injury,please ensure that personnel obey all the safety instructions provided below with utmost care:
1.No other person must approach or remain near the clicker press while it is running.
2.When the clicking press is running ,never place hands between the cutting board and the swing arm (for example: in order to change cutting die position).This must be observed while the machine is being switched off,since the oil pressure which supports the swing arm will be released and the cutting press head will descend.
3.Never wear clothing or jewelllery which can provoke a risk of injury when working on the machine(for example:wide or flapping clothing,scarves ,ties,or wide cuffed sleeves).
4. Never place any tools or other objects not directly used for the work in hand on the cutting board or mobile arm,Vessels containning liquid or beverages can spill into the electrical box casing severe electrical shock.
5.All interventions for adjustment settings and maintenance must be carried out by qualified personnel and only after tje machine has been disconnected from line main line current.
6. Never remove the labels attached to the machine and always respect tje warmings printed on these labels .If they are damaged in any way,the labels must be replaced fpr safety resons.
7.Never change or modify any of the protective covers or shields on the machine(Protective panels,ends -of-stroke blocks ,pressure swithes ,etc) nor any of the safety devices provided to protect ttje operator from injury,It is severely forbidden to tamper with the electrical installation of ,odify it in any way without the permission of Gerson Machinery.If these instructions are lack of respect of these regulations and standards(cutting machine damage,injury to personnel,etc)will be the total responsibility if the customer.
8.To clean the clicker press ,never use strong water jets,solvents ,gasonline,or any type of corrosive substance.Use only soft cloths soaked in detergent liquid,and when cleaning the electrical command panel,use a brush to remove the dust from the less accessible ares.
9.When carrying out cutting machine maintenance ,warn all personnel not to use the cutting machine.while maintenance operations are underway,and whenever the clicker press is being used ,the operator must always remain near the machine.
10.when any cutting machine components need replacing,request original spare parts from Gerson or from the authorised sales agent.
This clicking press has been designed and built for die cutting flecible and semi-rigid materials,such as leather,paper,plastic,rubber,cloth etc.,Never attampt to cut other types of hard or rigid materials on this kinds of clicker press such as :Metal,hard wood,bakelitel or any material containing toxic waste or dust such as asbestos.Take care to check that the interior of the material to be cut does not contain metal meshing or similar,which will not only damage the cutting dies,but also cause violent splinter fly.