Gerson gasket cutting machine is for die cutting gasket material including: EPDM, Rubber, Hypalon, Sheet and Roll,hand hole gaskets, o-rings, packing, compressed non-asbestos, custom cut rubber stencils, rubber products, molded rubber, extruded rubber, fluid sealing products, PTFE, Viton, Flexitalic, Hypalon, EPDM, Buna-N, vegetable fiber, sponge etc.,
There have Thress Gerson gasket cutting machine used in gasket maker or factory.gasket travelling head cutting machine and gasket beam cutting machine ,and swing arm cutting machine for small size dies.
1.gasket travelling head cutting machine
Travelling head cutting machine have manual traveling head press and CNC traveling head press.
The following is CNC traveling head press
1. Digital control system of “PLC + coder” human-machine interface is adopted to realize automatic feeding, pattern arrangement and cutting. Five kinds of arrangement figures are optional for automatically setting cutting times with high precision. The positioning precision can reach 0.2mm so as to save materials, enhance work efficiency and reduce labor intensity.
2. PLC program control center is provided with memory function for the settings of operation instructions, which are not influenced in case of power failure or power-cut after work, so as to facilitate operation for the next time.
3. Double oil cylinders drive, four-column guiding and automatic balancing are adopted to guarantee identical cutting depth for each time.
4. Three operation modes such as automatic, semiautomatic and manual operations are optional, which are free and flexible.
5. The cutting head can carry out automatic transverse movement and automatic positioning. The die cutter is fixed by electromagnetic suction disc. Without the need of setting die cutters, the upper and lower die cutters can carry out cutting freely with convenient operation.
6. The automatic lubricating system ensures machine precision and prolongs service life.
Model | GRM(A)-25T to 200T |
Max cutting force(T) | From 25 Tons to 200 Tons |
Range between working table | 50-240mm (Upper to Bottom Table) |
Stroke Adjustment | 0-170mm |
Cutting table width(mm) | 1800~2500mm or more |
Based on your material and die | |
Example: 1600X600mm etc., | |
Cutting Head Movable trolley | 500×500 to 1000x1000mm |
Motor power | 3kw to 22KW |
Electric Power | 220V/380V/415V,50-60hz etc., |
Machine Net weight (KG) | 1600 to 16500 |
1700 to 17500 |
Gerson can make the cutting machine according to your specifical requirement :such as cutting force power,worktable size,motor,etc.,
2.gasket beam cutting machine
1. Operate the structure of double cylinder and precise four-column automatic balancing links to make sure same cutting depth in each and every cutting region.
2. If the pressure plate presses downward to touch the die cutter, the appliance automatically slowly cuts, that make that there are no error involving the top and bottom layers of cutting materials.
3. Have setting structure especially, that makes adjustment of stroke safe and accurate coordinating with cutting force and cutting height.
4. Set automatic force feed to ensure the precision of machine and raise longevity of machine.
Applications:
From the smallest 25 Ton for the largest 500 Tons and up on request, Gerson Precise cutting machine are adaptable to some lots of applications. Suited to cutting many materials:Leather,rubber,fabric,plastic,paper,paperboard etc.,
Model | GRB(C)-25T to 500T |
Max cutting force(T) | From 25 Tons to 500 Tons |
Range between working table | 50-240mm (Upper to Bottom Table) |
Stroke Adjustment | 0-170mm |
Cutting area(mm) | (500-3000)X(500-3000)mm |
Based on your material and die | |
Example: 1600X600mm etc., | |
Motor power | 1.5 to 22KW |
Electric Power | 220V/380V/415V,50-60hz etc., |
Machine Net weight (KG) | 1600 to 16500 |
1700 to 17500 |
3.Gasket swing arm cutting machine
1.Easy to operate with swing arm and button press.
2.Economic cost and stable working function.
3.Two hands switches operate to ensure the operator is safe and easy.
4.The position of the swing arm is adjusted by the upper handwheel on the top of clicker press,which can obtain the best cutting position ,which can increase work efficiency and prolong the service life of cutting dies and board.
Model | GSB,GR,GRA,GRB serials |
Max cutting force(T) | 8Tons-500Tons or More |
Range between working table | 50-240mm (Upper to Bottom Table) |
Stroke Adjustment | 0-170mm |
Cutting table | 650×330mm to 3000mm×2500mm |
Based on your material and die | |
Example: 1000X500mm etc., | |
Cutting Head | 330×450 to More |
Motor power | 0.75kw to 22KW |
Electric Power | 220V/380V/415V,50-60hz etc., |
Machine Net weight (KG) | 1600 to 16500 |
1700 to 17500 |
Gerson can make the cutting machine according to your specifical requirement :such as cutting force power,worktable size,motor,etc.,