Gerson die cutting machine for most gasket material ,such as Neoprene,Nitrile ,viton , EPDM, Silicone,styrene butadiene, butadiene acrilonitrile, ethylene propylene, butyl, and hypalon Rubber, Polyurethane, Polyethylene etc.,Also for the other paper,cork,PTFE,leather material etc.,
According to Gerson experience ,we recommend Travelling head cutting machine for die cutting the above material.Also if the die more than 1000mm,we recommend use beam cutting machine .
One.manual traveling head cutting machine.
1.This type cutting machine feed by working hand and cutting by hand clicker .
2.The traveling head or trolley is light and move easily by hand .
Two.Automatic traveling head cutting machine
1.This type cutting machine is automatic feeding and automatic die cutting by CNC control.
2. continuous cutting of nonmetal roll materials or sheet materials.
3.The servo motor is adopted to control the horizontal movement of cutting head, And the multilayer materials are clamped by the cylinder for stepping feeding.
Model | GRM(A)-25T to 200T |
Max cutting force(T) | From 25 Tons to 200 Tons |
Range between working table | 50-240mm (Upper to Bottom Table) |
Stroke Adjustment | 0-170mm |
Cutting table width(mm) | 1800~2500mm or more |
Based on your material and die | |
Example: 1600X600mm etc., | |
Cutting Head Movable trolley | 500×500 to 1000x1000mm |
Motor power | 3kw to 22KW |
Electric Power | 220V/380V/415V,50-60hz etc., |
Machine Net weight (KG) | 1600 to 16500 |
1700 to 17500 |
Gerson can make the cutting machine according to your specifical requirement :such as cutting force power,worktable size,motor,etc.,