Die Cutting Machine
38 Years+ Manufacturer
Quote Now

clicker press cutting force adjustment

swing arm clicker press cutting force adjustment for the model “GR” swing arm cutting machine.

According to the agreement made with the customer,the press can be equip ped with a standard press button panel with a single cutting force setting ,or with an optional panel that can be programmed for material for three setting.

Single setting control panel

Turn the index of knob 3 in a clockwise direction to obtain a gradual increase in cutting stroke force .The cutting force used must be in proportion with the size of the die and the type of material to be cut.

Programmable panel

The programmable control button panel permits three different cutting force settings,adjustable using the regulartors R1,R2,R3 and able to be recalled using the corresponding butting P1,P2,P3.This devise is located on the left hand handle in place of the single press-button.

Cutting Method switch.

Switch n 7 is used to select the cutting method for use one the cutting machine.
Pressure garge cut; the presure is activated as soon as the beam comes into contact with the cutting die.
Timer cut;the pressure is automatically set on maximum value by the electronic card;the beam descent time is set by adjusting the potentiometer pressure.When this period is complete the beam returns to its original positions.

Have Question? Ask Now