50T hydraulic cutting press for composite material sheet or rolls is die cutting machine for cutting out the composite material sheet or rolls .The composite material including Two or more distinct materials (such as base, binder, filler, reinforcer) including of fabric,rubber ,leather ,plastic ,fiber,foam,polyolefin and glass fibers,Carbon/Epoxy Composite etc.,It can be 50 ton ,60 ton,80 ton ,100 ton ,120 ton ,150 ton,200 tons or more hydraulic pressure depending on your material and production.
1.The model hydraulic cutting press for cutting the composite material for making such as Door panel,Seat back covers,Parcel shelf,Tail gate cover,Trunk side trim,Inner tunnel trim,Pillar trim and many other similar products.
2.It can die cut any kinds of shapes by the required dies which can be mounted under the upper beam of the machine or on the cutting table. the die size can be same as the cutting surface or beam .
3.It is suitable for single-layer or multi-layer sheet or roll materials.It can be feed by manual or automatic .
4.With four columns auto balance structure of precision hydraulic die cutting press ,So that can ensure the equal pressure in any working area.
5.Any other question or requirement,please contact Gerosn sales department directly.
| Model | GRB(C)-25T to 500T |
| Max cutting force(T) | From 25 Tons to 500 Tons |
| Range between working table | 50-240mm (Upper to Bottom Table) |
| Stroke Adjustment | 0-170mm |
| Cutting area(mm) | (500-3000)X(500-3000)mm |
| Based on your material and die | |
| Example: 1600X600mm etc., | |
| Motor power | 1.5 to 22KW |
| Electric Power | 220V/380V/415V,50-60hz etc., |
| Machine Net weight (KG) | 1600 to 16500 |
| 1700 to 17500 |
