25 Ton Beam Press is full beam cutting press with 25T cutting pressure ,It is widely used in die cutting for large width material in sheet form or roll form .
1.The beam press is a highly effective method for cutting single or multi shapes from materialin single layer or multi layers.
2.It is very easy for operation .For manual feed material ,The operator just put material including The material and die tool are placed under the head of Beam Press, the operator then presses two push buttons to bring the cutting head ,The upper beam will decend for cutting out the shapes by the die tool.There are many different feed systems available with Beam Press Cutting Systems
3.High precision Low maintenance due to an automatic central lubricating system which continuously lubricates all of the main bushings.
4.From the smallest 25 Ton to the largest 500 Tons or more on request, Gerson Beam Presses are adaptable to a wide range of applications.
| Model | GRB(C)-25T to 500T |
| Max cutting force(T) | From 25 Tons to 500 Tons |
| Range between working table | 50-240mm (Upper to Bottom Table) |
| Stroke Adjustment | 0-170mm can be customized |
| Cutting area(mm) | (500-3000)X(1000-3000)mm |
| Based on your material and die | |
| Example: 1600X600mm etc., | |
| Motor power | 1.5 to 22KW |
| Electric Power | 220V/380V/415V,50-60hz etc., |
| Machine Net weight (KG) | 1600 to 16500 |
| 1700 to 17500 |
